课程门户-章节详情

水利工程制图

武心嘉、汪艳芳

1 制图基本知识 Basic Knowledge of Drawing
- 1.1 绪论 Introduction
- 1.2 制图工具及其用法 Drawing Tools and Their Utilization
- 1.3 国家标准有关规定 Related Provisions in National Standards
- 1.4 几何作图geometric construction
- 1.5 平面图形的绘制 The drawing of plane graphics
2 投影的基础知识 The basics of projection
- 2.1 投影法和投影特性 Projection method and projection properties
- 2.2 工程中常用的四种投影图Four kinds of projection drawings commonly used in engineering
- 2.3 物体的三面投影图 Three-sided projection of an object
3 点线面的正投影 Projection of point、line and plane
- 3.1 点的投影 Projection of Point
- 3.2 直线的投影 Projection of Line
- 3.3 平面的投影 Projection of Plane
- 3.4 直线与平面、平面与平面的相对位置The position of a line relative to a plane, plane relative to a plane
4 立体 Stereoscopic
- 4.1 平面体的投影Projection ofProjection of Planar Solids
- 4.2 平面立体表面上的点和线 Points and lines on a planar solid surface
- 4.3 平面立体截交线Plane stereo intersection line
- 4.4 曲面立体的投影Stereoscopic projection of a curved surface
- 4.5 曲面立体表面上的点和线Points and lines on the surface of a curved surface
- 4.6 曲面立体的截交线Curved solid intersection
5 立体表面相交Intersections of solids
- 5.1 概述Overview
- 5.2 两平面立体相交Two plane solids intersect
- 5.3 平面体与曲面体相贯Intersections Between Planar and Curved Solids
- 5.4 两曲面体的相贯线 The intersecting line of two curved bodies
- 5.5 常见两曲面立体相贯线的讨论Discussion on the intersecting line of two surfaces
6 组合体 composite solid
- 6.1 组合体构成分析 Composition analysis
- 6.2 组合体视图的画法 Composition View
- 6.3 组合体的尺寸标注 The dimension of the assembly
- 6.4 组合体视图的阅读 Reading the composite view
7 轴测图的画法 construction of axonometric drawing
- 7.1 轴测图的基本知识 Basic Knowledge
- 7.2 平面体的正等测 Isometric Drawing
- 7.3 平面体的斜二测 Cabinet Drawing
- 7.4 曲面体的正等测 Isometric Drawing of Curved Solids
- 7.5 曲面体的斜二测 Cabinet Drawing of Curved Solids
8 工程形体的表达方法Expression methods of engineering objects
- 8.1 视图 Views
- 8.2 剖视图 Section View
- 8.3 断面图 Cross Section
- 8.4 简化画法和规定画法Simplified and prescriptive drawing
- 8.5 视图的综合运用 Comprehensive use of views
- 8.6 补充
9 水工建筑物中常见的曲面 Curved surfaces in water conservancy project
- 9.1 概述
- 9.2 椭圆柱和椭圆锥
- 9.3 双曲抛物面
- 9.4 组合面Combination of surface
10 标高投影 Projection with heights
- 10.1 点、直线、平面 Points, lines, planes
- 10.2 两平面的交线
- 10.3 曲面和地形面 Curved and topographic surfaces
- 10.4 标高投影在工程中的应用Application in engineering
11 水利工程图 Hydraulic drawing
- 11.1 水工建筑物和水工图 Hydraulic structures and drawings
- 11.2 水利工程图表达 Expression of Hydraulic Engineering Drawing
- 11.3 水工图的尺寸标注 Dimensioning of hydraulic drawings
- 11.4 水工图的绘制 Drawing of hydraulic drawings
- 11.5 水工图的阅读 Reading of hydraulic drawings
12 建筑施工图Building construction drawing
- 12.1 概述Overview
- 12.2 建筑总平面图General plan of the building
- 12.3 建筑平面图Construction plan
- 12.4 建筑立面图 Elevation of Building
- 12.5 建筑剖面图Building profile
- 12.6 建筑详图 Architectural detailed drawing

工程中常用的四种投影图Four kinds of projection drawings commonly used in engineering

工程中常用的四种投影图Four kinds of projection drawings commonly used in engineering

一、多面正投影 multiple-plane projection

二、轴测投影图 Axonometric projection

三、标高投影 projection with heights

四、透视投影 perspective projection

图片预览